DUMP TRAILER Power UNIT- SINGLE ACTING
Basic Description
This electrical power unit includes a electrical power up gravity down circuit. Get started the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be provided if necessary. Also a stress compen sated movement management is usually extra to the circuit to regulate the descent speed of the cylinder.
Remark: Please check with our product sales engineer for the diverse pump displacement, motor electrical power or tank capability.
Distinctive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic components concerned prior to set up of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of impurities.N46 hydraulic oil is advisable.
four. The electrical power unit should be mounted horizontally.
five. Check the oil level during the tank after the initial running from the energy unit.
six. Oil changing is required following the original one hundred operation hours, afterwards as soon as just about every 3000 hours.
DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
Standard Description
This electrical power unit includes a power up power down circuit with load holding on the two A & B ports. A strain compensatred movement control can be additional to circuit to manage the decent speed on the cylinder.
Special Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before installation of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 
cst, which should also be clean and free of impurities. N46 hydraulic oil is advised.
4. The energy unit needs to be mounted horizontally.
five. Check the oil level during the tank immediately after the preliminary operating with the power unit.
6. Oil shifting is needed following the first 100 operation hours, afterwards when just about every 3000 hrs.