Materials Handling Power UNIT one
General Description
This power unit is made for that fork lift business, consisting of very efficient gear pump, DC motor, guide raise and decrease valve, tank, ect. The up and down motion are controlled by the lever in the manual release valve, which is outfitted with an electric switch to activate the motor. The lowing pace is controlled from the stress compensated flow manage valve.
Distinctive Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned ahead of set up of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
four. Oil changing is needed soon after the first a hundred operation hrs, afterwards after each 3000 hours.
5. The power unit shown is made to be mounted horizontally.
Material Handling Energy UNIT two
Basic Description
This power unit features power up gravity down circuit. Activate the start solenoid to start the motor to lift the 
machine. The lowing motion is activated through the solenoid valve together with the reducing velocity managed through the pressure compensated flow management valve. Items of this series is usually extensively used in the business of logistic products including fork lift, mini lift table, etc.
Special Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned before mounting the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities, N46 hydraulic oil is encouraged .
four. Oil altering is required after the original 100 operation hours,afterwards after every 3000 hrs.
five. The energy unit need to be mounted horizontally.