Rugged construction Type “MD” Buckets are most popular for standard goal elevators. Covering a wide selection of sizes from four to 20 inches lengthy, they can be applied for ?ne and medium size components such as coal, cement, pulp, grain, ear corn, and so forth. They may be broadly made use of for heavy abrasive materials such as sand, gravel, and stone. Reinforced front lips give Style “MD” Buckets a long sporting digging edge. Uniform wall thickness and powerful corner reinforcement make them stronger than steel buckets in the very same gauge.They can be smoothly surfaced and have ends sloped inward at 6 degree angles to insure good ?lling and clean discharge. Readily available in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Blend, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are utilized with G1, G6, K1, or K2 design attach-ments whenever they can be found during the chain sort.
Capacities are for buckets ?lled towards the line XX (see diagram). The useful working capability will fluctuate together with the loading conditions, angle of re-pose of your materials staying dealt with, plus the incli-nation with the elevator.
Fashion “AC” ELEVATOR BUCKETS for dealing with cement, lime, and ?uffy resources
Style “AC” Buckets supply quickly, thorough discharge of cement, lime, and also other dry, ?uffy elements. Vent holes from the bottom of every bucket release trapped air in ?lling and allow material to empty from bucket rapidly and wholly on discharge. Moreover to reinforcing lips, hooded backs reinforce “AC” Design Buckets. This feature permits closer bucket spacing and supplies 30% better carrying capability than other bucket variations on the very same length. 
These sturdy buckets have an extra thickness of metal at wear factors for longer support. Accessible in Al-lied-Locke Malleable and Promal.
Type “AC” Buckets are usually applied with heavy duty engineering chain this kind of as Bushed Steel Chain with K2 and K3 style attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The useful operat-ing capability will vary with loading ailments, angle of repose of the materials being handled, and the inclination from the elevator.
