Equipped with all the zero leak bidirectional checking sole-noid valves, this electrical power unit is made for the operation of two independent circuits. Which are respectively for that principal and subordinate platforms with the double scissors lift. Two cut-off valves are utilized for lowering the machine manually in case of power reduction. If extra independent circuits are needed for your application please get in touch with us for availability.
Remark: one. Please seek advice from our sales engineer for the unique pump displacement, motor power or tank capacity.
2. CSA or UL certified motors can be found upon request.
1. The AC motor is of S3 duty cycle, which can only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity of the oil shoud be 15~46 cst,as well as oil must be clean and absolutely free of impurities,N46 hydraulic oil is advisable.
4. The electrical power unit should really be mounted vertically.
5. Check the oil degree during the tank following the initial working of the energy unit.
six. Oil changing is required soon after the initial one hundred operation hours,afterwards when just about every 3000 hours.