Standard Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is built to operate materials dealing with gear. The lowering motion is achived through the solenoid valve with the reducing speed controlled by an adjustable needle valve. The left and correct functions are equipped that has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer to the unique pump displacement, motor power or tank capability.
Special Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned before installation of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities.N46 hydraulic oil is proposed.
4. This power unit should be mounted horizontal.
five. Check the oil degree from the tank immediately after the 1st start off in the energy unit.
6. Oil modifying is required immediately after the original a hundred operation hrs, afterwards once each and every 3000 hours.